Titanium Front Rear Portal Axle Set For 1/10 Axial SCX10 II 90046 90047 RC Car. Hardened steel structure gears and drive shafts are durable. The Portal axle produces a huge ground clearance below the axle center, which increases the ground clearance by about 12mm.
Using all stock links, these axles can directly replace any Axial AR44 axle. Need to use the inner diameter of the rim larger than 13.5mm, the shafts must be used in pairs, if there is no rear part, the front door shaft cannot be operated, and vice versa. Material: Aluminum & Steel Total Lengthapprox: 218mm / 8.58in Pin to Pin Widthapprox: 190mm/7.48in Portal Increase Heightapprox: 13mm / 0.51in Standard Hexapprox:12mm Hex Widthapprox: 6.5mm Axle Output Shaftapprox:5mm Links Mount Width: 7.2mm Gear ratio: 8/30T, helical gear Portal Gear Set: 16T/16T Total Gear Ratio:3.75:1. Front & Rear Portal Axle Set. Color might be slightly different due to the color calibration of each individual monitor.Please allow slightly measuring deviation due to manual measurement. Customer satisfactory is most important to us. We will try our best to solve the problem asap. Your satisfactory is our goal. For example, Laser Pointer is unacceptable in some countries. Defective product must tell us within 3 days attached with the picture of defective part. Please return it with your own cost within 2 weeks from the time the merchandise is received. (you should include all original items undamaged in resaleable condition, thanks). Buyers have to pay for the return cost and we will pay the cost for resend. Our working schedule: (including hotline and online inquiry).